Gearbox housing heater details

Introduce：Transmission housing heater-housing heater, gearbox housing heater details, gearbox housing heater selection parameters, a high-efficiency induction heating method using frequency conversion technology, automatic demagnetization function

Consultation

Related Products

Related Pictures

Introduction

Consultation

Gearbox housing heater details

The GHJ- N ( W ) gearbox housing heater is a highly efficient induction heating method using variable frequency technology. The principle is to turn the power frequency power supply into a frequency of around 20KHZ and increase the frequency tracking technology. The heating device can be operated in an optimum state in the case where the workpiece to be heated is different. The thermal efficiency of its energy conversion can reach more than 98% .

The gearbox housing heater solves the problem of small-diameter large workpieces that cannot be solved by the power frequency heating assembly in the field of thermal assembly. (Frequency heating heat assembly by magnetic iron core, so that there is change in the magnetic field generating workpiece) and the gearbox housing a heater core without iron (steel sheet). The inductor consists of a copper coil and a ferrite. (The sensor is made according to the hole size of the workpiece. ) The sensor is placed in the bore of the heated workpiece. After turning on the power, quickly heat the workpiece. The gearbox housing heater is an efficient induction heating method that uses inverter technology to replace thyristors with IGBT tubes.

The gearbox housing heater has the advantages of fast heating speed, high thermal efficiency, light weight and durability. And set three control modes: 1. Time control 2. Temperature control 3. Temperature maintenance. And has an automatic demagnetization function.

Selection parameters of gearbox housing heater

Device Name:	Gearbox housing heater
Equipment model:	GHJ -N (series); GHJ -W (series)
equipment power:	2-10 KW
voltage:	220V/ two phase; 380V/ three phase
working frequency:	10-20 KHz
Heating the workpiece size:	Customized on demand
Number of workpieces heated at one time:	Can do multi-station selection
heating method:	Induction heating
Control mode:	1. Temperature control ( 0-240 °C) 2. Time Mode (0-99 '59' ') 3. Insulation control (constant temperature difference -3 °C)
Cooling device:	Forced air cooling
Overheating protection:	Have

Understand Wikipedia： induction heating

ALL GATEGORIES

Gearbox housing heater details