Φ 48- Φ 159 steel pipe epoxy powder coating anti-corrosion production line
The total length of the transmission line is 43 meters, of which 4 are 5.5 meters × 1.2 meters, one is 8 meters × 1.2 meters, and one is 10 meters × 1.2 meters. The base and transmission wheel brackets are all welded by 14# channel steel. 5.5 meters of 4 sets of tires, 8 meters of 6 sets of tires, 10 meters of 7 sets of tires.
The driving wheel and the driven wheel are respectively mounted on the adjustable plate of the screw rod, which facilitates the adjustment of the production size tube. There are 4 transmission powers , all of which adopt frequency conversion speed regulation. The frequency converter adopts Hailipu frequency converter, and the frequency conversion speed regulation makes the steel pipe transmission smooth, so that the thickness of the anti-corrosion layer is uniform. We also use a pressure tube mechanism to prevent the pipe from affecting the pipe being processed during acceleration and decoupling. The base has a height adjustment screw to facilitate horizontal adjustment of the production line.
The tires are made of 400-8 type weighted tires and connected by a universal joint drive shaft. The reducer adopts a pendulum type, and the motor is a 2.2KW variable frequency motor. There are also 3 single racks (one of which is equipped with high temperature resistant tires) for easy chasing and pipe removal.
Φ 48- Φ 159 steel pipe epoxy powder coating anti-corrosion production line medium frequency heating selection :
Equipment type KGPS- 35 0/1
Equipment rated power
Rated output voltage
Rated output current
Complete configuration list:
Model 787 2.7
Circuit breaker (Delixi)
Ø12 tube, inner diameter Ø190
Φ 48- Φ 159 steel pipe epoxy powder coating anti-corrosion production line selection
Electrostatic spraying equipment:
1 , 8 gun control center DK type Each apparatus having the above automatic gun 8, a high-pressure spray gun is built, control cabinet 8 controls automatic spray gun voltage, current and gas system, and for controlling branched venturi powder pump system for the powder.
Means for containing the powder bed more than 1 set, bed dimensions: 8 Venturi toner supply pump (L × W × H) 800 × 775 × 570 (mm) containing.
Dial up and down by cylinder tube pipe, with upper and lower fork tube 4, four cylinders and pneumatic and electrical control system.
The wire wheel and compressed air are used to remove rust, and the surface burrs and floating ash of the steel pipe are removed to improve the adhesion of the epoxy powder. Descaling device 1 comprises a sleeve 2 and the like protection and dust discharge cover. The wire wheel has a diameter of 150mm and a rotational power of 2.2kw.
The air compressor adopts a 6- cube screw air compressor, a 1.5- cubic gas storage tank, and a 6- cubic air dryer, supporting the gas path and control part.
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved