Hot search: 3KW electromag
1T one belt tw
Aluminum forgi
15KW electroma
160kw medium frequency induction heating furnace electrical s
Mechanical schematic diagram of automatic feeding of round st
20mm bar induction heating forging furnace
Bar Induction Heating Furnace Foundation Map
Plane Layout of Intermediate Frequency Induction Heating Furn
billet induction heating furnace coilAutomotive (agricultural vehicles) leaf spring ends of the heating furnace
1, leaf spring ends of the heating furnace process parameters and requirements
Equipment use: automotive (agricultural vehicle) leaf spring end heating
Workpiece material: 60Si2Mn 50GrVA 55SiMnVB
Workpiece size: single piece maximum size 2300x1 2 0 x25 ( mm ) ( length x width x thick)
Effective end diathermy size: length 300-450mm width 7 0-1 2 0mm thickness 8 -25mm
Diathermy temperature: ≥ 1100 °C ± 20 °C (heating temperature is uniform, no obvious black marks on the surface)
Continuous production beat: 5-6 heads / minute (end single head)
Sensor customized using demand-side inductor, and capacitor banks installed in one.
The thyristor is manufactured by Hubei Xiangfan Taiji Power Equipment Co., Ltd. or Tsinghua University Power Electronics Factory . In addition to the conventional damage protection, temperature sensing components must be installed to increase overheat protection.
The main switch uses an electric switch with a large current.
2, leaf spring ends of the heating furnace configuration selection method:
Scope of supply:
Serial number | name | regulation grid | Quantity | Total price |
1 | IF power supply (without compensation capacitor cabinet) | KGPS — 400 / 8 | 1 set | |
2 | Remote console | 1 set |
Price: equipment package dry price (including freight, installation and commissioning fees, random accessories fee): RMB : 200000 yuan.
3 , Leaf spring ends of the heating furnace specifications and technical characteristics:
( 1 ) The startup success rate can reach 100%
( 2 ) The rectification power factor is greater than or equal to 0.92
( 3 ) Power rating: 250 - 400KW
( 4 ) Power supply rated frequency: 6000 - 6500HZ
( 5 ) IF voltage 750V
( 6 ) DC voltage 500V
( 7 ) Power supply noise is less than standard
( 8 ) with internal and external conversion and automatic manual conversion
( 9 ) All digital, no relay control loop, making the system stable and reliable
( 10 ) It has complete protection such as overcurrent, overvoltage, undervoltage, phase loss, water pressure and water temperature to ensure that any faults will not damage the equipment components.
( 11 ) Three-phase incoming line does not distinguish phase sequence, can be connected arbitrarily
( 12 ) Easy-to-use "fool" type equipment, never malfunction
( 13 ) The shape and internal components of the equipment are completely supplied by the same supplier as the Shaanxi KTG-400/8 power supply, and the protection can be interchanged.
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved
