Aluminum bronze ingot medium frequency heating equipment

Introduce：Aluminum bronze ingot medium frequency heating equipment,Aluminum bronze ingot medium frequency heating equipment manufacturer,the Method of choosing Aluminum bronze ingot medium frequency heating equipment

Consultation

Related Products

Related Pictures

Introduction

Consultation

Aluminum bronze ingot medium frequency heating equipment

workpiece parameters and process requirements

1. Heating the workpiece parameters:

1) φ 120mm (outer diameter) × ( 230~400 ) mm ( length )

2) φ 170mm (outer diameter) × ( 350~450 ) mm ( length )

Ingot heating temperature range: 600 °C - 980 °C

Among them: copper chromium zirconium, copper chromium alloy ingot temperature 900 °C - 960 °C

Manganese brass ingot temperature 620 °C - 750 °C

Aluminum bronze ingot temperature 820 °C - 900 °C

Ingot billet temperature measuring instrument control accuracy: ± 1 °C

Ingot billet temperature control accuracy:

1) Temperature deviation of the same ingot:

(Measure the surface temperature by direct contact with the thermometer; measure the core temperature by axial drilling)

a) Ingot core surface temperature difference ≤ 10 °C

b) In- situ axial temperature difference ≤ 10 °C

2) Temperature deviation of the same batch of ingots ≤ 10 °C

加热炉感应器1.png

Overview of aluminum bronze ingot medium frequency heating equipment and furnace switching :

Manually placing the workpiece to be heated into the feeder on the rafter, and feeding the workpiece to be heated in a stepwise manner to the nip roller feeding system by the hopper on the rafter, and then setting the workpiece according to the nip roller feeding system The good feed rate is sequentially fed into the heating furnace for heating, and the workpiece is heated by the heating inductor. After the heating is completed, the workpiece is quickly conveyed by the quick discharging mechanism to perform temperature detection to prevent temperature loss. An infrared thermometer is arranged at the outlet of the inductor to perform temperature detection on the heated workpiece. After the temperature detection system completes the detection, the PLC sends the signal to the intermediate frequency power cabinet under the condition that the workpiece temperature is insufficient , so that the heated workpiece is reached. The required temperature, temperature and power control, the temperature of the power cabinet automatically drops when the temperature is over-fired, and the temperature of the discharge is guaranteed to reach the required temperature. After the temperature detection is completed, the workpiece with the qualified temperature is sent to the next process by the three sorting mechanisms. The workpieces whose heating temperature is unqualified are sorted separately for high temperature and insufficient temperature.

Furnace switching:

Scope of supply and functional description :

1. The scope of supply is as follows

Serial number	content	Quantity	Remarks
1	IF power cabinet	1 set
2	Compensation capacitor cabinet	1 set
3	Induction heating furnace	2 sets
4	搓 Board system	1 set
5	Linear feeding mechanism	1 set
6	Loading system hydraulic station	1 set	Hydraulically loaded
7	Roller feed system	1 set
8	Rapid discharge system	1 set
9	Infrared temperature measuring device	1 set
10	PLC temperature control system	1 set
11	Three sorting agencies	1 set
12	Aluminum bronze ingot medium frequency heating equipment connection copper row	1 set
13	Operation screen	1 set

2 , aluminum bronze ingot medium frequency heating equipment technical characteristics

Our company designs and uses the frequency-swept constant-power impact-resistant medium-frequency power supply with advanced level in China for the actual production needs of your factory. Its main features are as follows:

The control system adopts large-scale programmable logic array module integrated control, single board structure, avoiding ( 6- pulse control board)

3 , heating furnace body:

Furnace structure

For different heated workpieces, different heating furnaces should be replaced during heating. In order to facilitate the replacement and reduce the workload when replacing the furnace body, our heating furnace is designed as an overall quick change type (see above). Quick change is possible when changing the furnace body for different heated workpieces.

4 , automatic control system

The aluminum bronze ingot medium frequency heating equipment of the automatic control system consists of:

a , man-machine interface operation screen

c , a set of programmable controller

d , infrared thermometer 1 (United States Leitai)

Understand Wikipedia： induction heating

Recommended Reading： induction heating furnace

Recommended Reading： aluminum rod induction heating furnace

PREV：UL+Z-1600+255/2+10 aluminum and aluminum alloy rod continuous casting and rolling production line

NEXT：Trapezoidal aluminum ingot heating furnace

[ BACK ]