Hot search: 3KW electromag
Aluminum ingot
1T one belt tw
2T steel melt
1. Selection of transformer capacity of medium frequency induction furnace
The value of the transformer capacity = the value of the power supply of the IF induction furnace x 1.2
The transformer is a rectifier transformer. In order to reduce the interference of harmonics, it is as special as possible for the special plane, that is, one intermediate frequency induction furnace is equipped with a rectifier transformer.
2. Selection of the incoming voltage of the medium frequency induction furnace
For the intermediate frequency power supply for medium frequency induction furnaces below 1000KW, three-phase five-wire 380V and 50HZ industrial power are generally used. For medium frequency induction furnaces above 1000KW, the focus is on using 660V incoming voltage.
3. According to the capacity requirements, determine the medium frequency induction furnace with large tonnage.
The capacity of the medium frequency induction furnace can be determined by the weight of the individual pieces and the weight of the molten iron required for each working day.
The standard tonnage is as follows:
1T medium frequency induction furnace
500kg medium frequency induction furnace
1T medium frequency induction furnace
2T medium frequency induction furnace
1T medium frequency induction furnace
5T medium frequency induction furnace
4. Selection of furnace structure
The melting furnace for the aluminum alloy structure with the reducer as the tilting furnace is commonly known as the aluminum shell furnace. The induction melting furnace of the steel structure with the hydraulic cylinder as the tilting furnace is commonly called the steel shell furnace. The steel shell furnace is a steel structure, and the aluminum shell furnace shell material is an aluminum alloy.
Copyright© 2007-2013 NO.6 Electric Mall All Rights Reserved
