Φ20—Φ32 steel pipe epoxy powder coating anti-corrosion production line

Φ20-Φ32 epoxy powder coating anti-corrosion production line process requirements

Workpiece: Φ20-Φ32 × 10m

Coating requirements: epoxy powder coating 400-500um

Process line speed: 3-4m/ min

 Φ 20 -Φ 32 epoxy powder coating anti-corrosion production line mechanical description

Transmission line length of 40 m, containing eight 4.0 m × 0.8 yards gear frame; bracket base and the drive wheel 10 in all channel welded total length of 40 m #.

Φ 20 -Φ 32 epoxy powder coating anti-corrosion production line medium frequency induction heating equipment selection :

Φ20—Φ32 epoxy powder coating anti-corrosion production line electrostatic spraying equipment selection :

Gun control center DK type , the above device contains 4 automatic spray guns , the spray gun is built-in high pressure, the control cabinet controls the voltage, current and gas path system of 4 automatic spray guns, and controls the venturi powder supply pump powder supply system. The above device contains 1 set offluidized bed powder supply system . The size of the fluidized bed : (L × W × H) 800 × 775 × 570 (mm) contains 4 venturi powder pumps.

 Φ 20 —Φ 32 epoxy powder coating anti-corrosion production line pipe system:

Upper and lower fork tube 4, a cylinder 4 and a control system. (including solenoid valves, valve blocks, PVC air pipes, control buttons, etc.).

The production cycle is 25 days, and the installation cycle is 10 days when conditions are met .

 Φ 20 —Φ 32 epoxy powder coating anti-corrosion production line powder spraying equipment:

4 gun control cabinet DK type 1 set

4 gun barrel fluidization 1 (Including four Venturi pump for powder)

1 set of gun frame adjustment mechanism

A powder room

1 set of recovery unit (cyclone, filter level 2 recovery)